Edit and update a saved program.
Follow the instructions below to edit or update a saved program. You will be able
to update all the parameters of the brewing process as well as the name and
notes.
-
Tap on the Program button located on the Home Screen.
Home Screen Program Menu
- On the Programs Menu, tap on the pencil/edit icon in the screen's lower right-hand corner.
-
The screen will update, and each program will have two rows of dots running
along the left-hand edge of the Program Button and a Pencil icon at the lower
right-hand corner.
Edit Program Program Recipe (ready to brew or edit)
- In the lower right-hand corner of the saved Program is the pencil/edit icon. Tap on the icon.
-
A pop-up menu will open with the following options: Shot Settings, Name, Notes,
Image, Duplicate, and Delete.
Figure 1. Edit Shot Settings
-
Tap on the menu item you want to update and follow the screen prompts to
compete the change.
Figure 2. Shot Settings
- If you want to update the parameters of the shot, tap on Shot Settings. Here you can adjust the parameters: Temperature, Volume Output, Pre-Infusion Time, Pre-Infusion Pressure, Infusion Pressure, Ramp Down Time, and Ramp Down Pressure.
- Adjust the parameters with the minus (-) and plus (+) buttons on the right-hand side of the screen.
-
When you have finished updating the shot, tap on the arrow button at the bottom
of the screen.
Figure 3. Read To Brew
- Brew the updated shot by pressing the Brew Paddle to the left.
- After the shot has been pulled, the portafilter has been removed, and the grounds tossed, purge the brew head and rinse the portafilter to clean out any residual grounds and oils from the coffee beans.
Parent topic: Programs Menu
-
home_screen.JPEG
30 KB Download
-
program_menu.JPEG
20 KB Download
-
program_menu_edit.JPEG
20 KB Download
-
program_settings.JPEG
30 KB Download
-
program_ready.JPEG
30 KB Download
-
shot_settings_complete.png
300 KB Download