Safe Mode

Safe Mode is a special operating mode where the pump is disabled. Safe mode is primarily used in 2 instances:

Starting Up
1. Use Safe mode if you are turning on the machine with an unknown configuration (plumbed or water reservoir). If the machine is set up to be plumbed, safe mode will make sure the pump does not turn on without a water source.
  1. To activate Safe Mode
    1. Turn on the ES.1.
    2. When the ES.1 logo screen appears, press the tea button for at least 3 seconds.
      Note: You must press the Tea button within 1 second after the ES.1 logo appears.
      
      Note: There is no penalty for pressing the button too early, or for holding the button for longer than 3 seconds.
  2. You are now in safe mode. From here you can determine if the ES.1 is set up to be plumbed into a water source or not. If the ES.1 is set up to be plumbed, you can safely connect the ES.1 to the water source and turn the water source.
2. Deactivate Safe Mode by pressing the Exit button on the home screen. Then proceed with booting up the ES.1. The pump will run and the ES.1 will fill with water and heat up.
Depressurizing and Draining
1. Safe Mode is automatically activated as part of the de-pressurize and drain procedure.
2. Follow instructions for Preparing the ES.1 for Storage or Shipping.

Search